Article 28. Railway bridge protection scope
Law 35/2005/QH11 — Luật Đường sắt số 35/2005/QH11
1. The railway bridge protection scope covers the overhead spaces, the land areas, water areas and the under-water surface land areas around the bridges.
2. The overhead protection scope of a bridge shall be 2 meters measuring vertically from the highest point of the bridge structure; in cases where the bridge only has rails, the overhead protection scope of the bridge must not be shorter than the limited height defined in Clause 1, Article 27 of this Law.
3. The lengthwise bridge protection scope shall be calculated as follows:
a) From the protection signal post on this bridge head to the protection signal post on the other bridge head, for bridges with protection signal posts;
b) From the end of the abutment on this bridge head to the end of the abutment on the other head plus 50 meters to each head of the bridge, for bridges without protection signal posts.
4. Horizontal bridge protection scope shall be calculated as follows:
a) For viaducts and river-spanning bridges of less than 20 meters long in urban centers, it is 5 meters counting from the outermost edge of the rail to each side;
b) For river-spanning bridges of 20 meters long or over in urban centers and bridges outside urban centers, it is 20 meters counting from the outermost edge of the bridge structure to each side, for bridges of less than 20 meters long; 50 meters for bridges of between 20 and under 60 meters long; 100 meters for bridges of between 60 to 300 meters long; 150 meters for bridges of over 300 meters long.
Article 28, Law 35/2005/QH11