Article 57. Safety in use of electricity for production
Law 28/2004/QH11 — Luật Điện lực số 28/2004/QH11
1. Organizations and individuals using electricity for production must comply with the regulations on electric safety, regulations and technical standards on electric safety must conform with Vietnamese standards.
2. Electric equipment, systems of electric equipment, lightning-arresting and earthed systems must be pre-acceptance tested, periodically and extraordinarily checked according to the electric safety regulations and technical standards. The diagrams of these systems must be compatible with actual positions and be archived together with inspection minutes throughout the course of operation.
3. The internal transformer stations, high-voltage equipment and transmission lines must be installed and managed according to electric safety regulations and technical standards.
4. Electric equipment must conform to “Vietnamese Standard - Low-Voltage Electric Equipment - General Requirements on Protection against Electric Shocks” and “ Vietnamese Standard - Regulations on Earth-Connection and Air-Connection of Electric Equipment” to prevent electric shocks.
5. Electricity transmission lines, electric conductors must be designed and installed to ensure clear and airy production ground, thus avoiding mechanical or chemical impacts with may cause breakdowns. Metal structures of workshops, machinery, metal tubes must not be used as “neutral conductors,” except for special cases where separate designs approved by competent state bodies are required.
6. The electric systems in areas where exist inflammables, explosion-prone substances must be designed, installed and used according to the provisions of Clause 4, Article 54 of this Law.
7. Electric equipment used in minerals exploitation, electric instruments, mobile electric equipment, welding machine, electrolysis, electroplating equipment must conform to the relevant electric safety regulations and technical standards.
Article 57, Law 28/2004/QH11